|
|
  
 
Subject:
Back to Corvettes -- Re: we could have prevented it
From: "Dad" <knockers(at)fish.net>
Subject: Back to Corvettes -- Re: we could have prevented it
Date: Wed, 5 May 2004 15:53:02 -0400
Lines: 25
NNTP-Posting-Host: 216.201.44.37
________________________________________________
I know, my spell checker quit and left the state when I tried to reply, so I
just deleted it, he wouldn`t recognize his post with the words spelled
correct anyhow. We need this to get back to Corvettes, but then he thinks I
spend to much time on them and not the news. Go figure, why would I be
spending to much time on Corvettes in a Corvette news group????
--
Dad
04 C5 CE Z51
72 Shark Black/Black/4spd
"JOEVET" <CHOPR147(at)OPTONLINE.NET> wrote in message
news:pY9mc.144110$Gd3.34491708(at)news4.srv.hcvlny.cv.net...
> I don`t get it.Why does dumb ass Dave even think we care about his
assinine
> opinion? I may have to close my posts with "shut up Dave". Oh that`s
already
> been done,i`ll go with "dumbass Dave"
>
> BTW THERE IS NO "Y" IN BULIMIA DUMBASS
>
>
> DUMBASS DAVE
> <DaveinIllinois(at)webtv.net> wrote in message
> news:13122-40982993-177(at)storefull-3231.bay.webtv.net...
From: Diode <me(at)aintgonnatellya.com>
Subject: Re: Backfiring (Update)
Lines: 16
Date: Sun, 06 Jun 2004 04:08:15 GMT
NNTP-Posting-Host: 24.47.238.100
________________________________________________
Diode spoke thusly...
> OK, I have had this car a year and 3 days now. Little by little I`m
<snip>
OK, It`s definitely a malfunctioning diverter valve. I disconnected and
plugged the AIR lines at the check valves and took it for a ride. Not a
peep...or should I say "pop". I checked the usual suspects and I don`t
see a rebuilding kit for the valve. I don`t even see a replacement
valve for 68. Anybody got an idea? Anybody fix one of these?
--
-|>|- Diode -|<|-
`68 L-79 Coupe
`79 Triumph Bonneville
Shut up, dave.
Professional driver on a closed course. Do not attempt.
Actual mileage may vary.
From: Robotron Tom <usa1(at)nospamiei.net>
Subject: Re: Backfiring (Update)
Date: 6 Jun 2004 18:21:47 GMT
Lines: 19
NNTP-Posting-Host: p-288.newsdawg.com
________________________________________________
Diode <me(at)aintgonnatellya.com> started a controversy when he said in
news:PMwwc.6334$c76.4403322(at)news4.srv.hcvlny.cv.net:
> see a rebuilding kit for the valve. I don`t even see a replacement
> valve for 68. Anybody got an idea? Anybody fix one of these?
Try:
http://vettes.com/Parts/Parts_1.asp?catid=78&subid=376
http://www.corvetteparts.com/catalog/0205059/1.htm
http://www.cranescorvette.com/new_page_86.htm
--
Robotron Tom *remove nospam to email*
Flashback Arcade Sales at: http:// www.arcadeguy.net
"All that is needed for evil to triumph is for good men to do nothing."
-Edmund Burke
NEXT POSTS:
| | |
